What kind of configuration should be equipped with high-grade sliding door woodworking engraving machine?

The sliding door engraving machine is the highest configuration machine in the ordinary engraving machine. Nowadays, the sliding door engraving machine produced by many manufacturers in Jinan is modified by woodworking engraving machine. Many accessories can not keep up with the overall needs of the machine, so it will lead to the engraving machine in the operation process. There are minor problems in the medium frequency. In order to meet the needs of the market, Jinan Snow Scientific has developed a sliding door engraving machine for professional production. Xiaobian introduces the obvious advantages of the sliding door engraving machine.
Firstly, the sliding door engraving machine generally adopts double-head configuration. The double-head sliding door engraving machine can improve the engraving efficiency of the sliding door panel. The sliding door engraving is deep relief carving, and the single-head engraving speed is slow, so it is necessary to adopt a double-head design, so that it can be greatly Increased production efficiency.
Double-head engraving needs to increase the width of the machine. Our company will widen the machine to 1.8 meters, ensuring that two coffin plates can be engraved at the same time. The machine bed is made of thick square tube (usually 5mm thick steel plate, If the customer has special requirements, it can be thickened), which fully guarantees the stability of the machine.
Once again, the machine uses 8MM thick seamless welded steel gantry to ensure that the gantry does not shake and deform under high-intensity working conditions.
The selection of accessories is also the selection of the best domestic accessories. Changzhou Hanqi's high-power water-cooled spindle, the Japanese extension brand inverter, the guide rails are all genuine Taiwan's silver square track, to ensure the overall operation of the machine is stable.
The use of sliding door engraving machine began in the past few years, but the technology has matured in the past two years. Jinan Ludiao CNC has developed a professional sliding door engraving machine for the needs of the market, allowing customers to use the most suitable machine. The most suitable job.

Is the spindle of the engraving machine good for water cooling or air cooling?

Many customers will encounter such a problem when purchasing the spindle of the engraving machine. Is the engraving machine main shaft selected for water cooling or air cooling? For this problem, Jinan engraving machine manufacturer - Warwick CNC, for everyone to list the engraving machine water-cooled spindle motor The main differences between air-cooled spindle motors are as follows:
1, cooling method:

The water-cooled spindle motor uses water circulation to cool the heat generated by the spindle's high-speed rotation. This method works well because the temperature after circulation does not exceed 40 degrees.

The air-cooled spindle motor uses a fan to dissipate heat, and its effect is certainly not as good as water cooling.

2. Noise:

The water-cooled spindle motor is basically no noise, but the air-cooled spindle motor is very loud.

3. Service life:

Because the water-cooled spindle motor should pay attention to maintenance, change water or use industrial water cooler, its service life is much longer than that of air-cooled spindle motor.

4. Accuracy:

The axial and radial runout of the water-cooled spindle motor are basically below 0.003 mm, which is far from the air-cooled spindle motor (domestic)!

5, easy to use:

Since the water-cooled main shaft needs to be connected to the water pump, it needs a bucket to hold the water. It needs to be connected to the water pipe, especially in the cold winter in the north. It may be more troublesome for customers in the cold winter; the air-cooled spindle will not have so much. Problem with the use.

Is the engraving machine main shaft selected for water cooling or air cooling? The high quality engraving machine is usually equipped with a high performance spindle to play its role. As for whether to choose water cooling or air cooling, you need to decide according to actual needs, compare the difference between the two, and choose the one that is most suitable for your own business.