Common software and experience of advertising engraving machine?

1. Commonly used software for advertising engraving machines: There are many, including Wentai, ARTCAM, Carved, CorelDRAW, powermill, type3, Rhino, Zbrush, Geomagic studio, etc.

2, advertising engraving machine experience:

(1) In the actual processing, the relationship between the machining effect and the machining efficiency should be fully considered, and the coarse knife, the fine knife and the three-dimensional engraving method can be flexibly applied, and the large-area graphic area engraving is processed using a large cutter, and the small-area graphic area or To reflect the effect, a small tool should be used for fine machining, and the setting of the overlap rate of the tool is also important.

(2) Select the processing method according to the processing result requirements-----two-dimensional engraving, three-dimensional engraving or cutting. If pattern engraving is performed, two-dimensional or three-dimensional engraving is selected, and the generated processing path is the engraving path. If you are cutting and machining the wall surface of the sand table model, select "Cutting Word" and the generated path is the cutting path.

(3) According to the requirements of processing effect, the path generation method is selected. The two-dimensional path is suitable for plane engraving. The processing effect does not have a strong three-dimensional effect, and the processing fineness is inversely proportional to the processing depth. The three-dimensional path has a "clear angle" engraving action, the processing effect has a strong three-dimensional effect, the processing pattern is fine, the processing fineness is directly related to the fineness of the pattern and the accuracy of the tool parameters, and the processing depth only affects the three-dimensional and does not affect the fineness of the processing. The degree, the greater the processing depth, the stronger the stereoscopic effect.

(4) According to the fineness of processing and the texture of the material, the engraving processing path is selected----horizontal milling, longitudinal milling, forward 45-degree milling, and reverse 45-degree milling. These engraving paths produce high precision. The processing surface is smooth. The circular path has a fast processing speed and high efficiency, but the processing effect is inferior to others.

(5) Engraving tool selection, pay attention to the influence of the cutting edge angle and blade width on the machining accuracy and progress. If the cutting edge angle and blade width are large, the machining speed is fast, but the machining pattern is not fine, the cutting edge angle and edge of the tool The width is small, the processing speed is slow, but the graphics are fine and the durability of the tool is relatively poor.